Thermal Management Tool

Select Options Below

Product Category

Cooling Capacity Units

Cooling Capacity Range

Cooling Type

Mounting Range

Thermal Management Selection Tool

Need help to determine your data center cooling requirements? The Thermal Management Selection Tool helps you select the best cooling equipment for a broad range of applications including small or large data rooms, high-density data rooms, shelter cooling, server racks, and enterprise data centers. Just answer a few questions in the form on the side to use the Thermal Management Selection Tool.

Thermal Management Selection Tool
Joe Powell and Associates 1400 Series Cable Caps

1400 Series Cable Caps

These neoprene or TPR caps seal off open cable ends. Caps with air valves retain a nominal air pressure of five to fifteen pounds. The adjustable stainless steel band clamps ​enable caps to be used effectively on cable .250 inches (6.35mm) to .500 inches (12.70mm) smaller than the cap’s inside diameter. All caps are 4.0 […]
Joe Powell and Associates CB0028

CB0028

Air-Cooled, freecooling and adiabatic freecooling chillers designed for the efficient cooling of small data centers
Joe Powell and Associates CG0023
Joe Powell and Associates CR019RA, Air-Cooled, 300mm, 19kW

CR019RA, Air-Cooled, 300mm, 19kW

The Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity. The system is designed for small and medium data centers or higher density containment applications in large data centers.
Joe Powell and Associates CR019RW, Water/Glycol Cooled, 19kW

CR019RW, Water/Glycol Cooled, 19kW

The Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity. The system is designed for small and medium data centers or higher density containment applications in large data centers.
Joe Powell and Associates CR020RA, Air-Cooled, 20kW

CR020RA, Air-Cooled, 20kW

The Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity. The system is designed for small and medium data centers or higher density containment applications in large data centers.
Joe Powell and Associates CR032RC, Chilled Water, 32kW

CR032RC, Chilled Water, 32kW

The Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity. The system is designed for small and medium data centers or higher density containment applications in large data centers.
Joe Powell and Associates CR035RA, Air-Cooled, 35kW

CR035RA, Air-Cooled, 35kW

The Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity. The system is designed for small and medium data centers or higher density containment applications in large data centers.
Joe Powell and Associates CR035RW, Water/Glycol Cooled, 35kW

CR035RW, Water/Glycol Cooled, 35kW

The Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity. The system is designed for small and medium data centers or higher density containment applications in large data centers.
Joe Powell and Associates CR040RC, Chilled Water, 40kW

CR040RC, Chilled Water, 40kW

The Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity. The system is designed for small and medium data centers or higher density containment applications in large data centers.
Joe Powell and Associates CW038, 38kW

CW038, 38kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW041, 41kW

CW041, 41kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW051, 51kW

CW051, 51kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW060, 60kW

CW060, 60kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW076, 76kW

CW076, 76kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW084, 84kW

CW084, 84kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW114, 114kW

CW114, 114kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW146, 146kW

CW146, 146kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW181, 181kW

CW181, 181kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW300, 300kW

CW300, 300kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW340, 340 kW

CW340, 340 kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW400, 400kW

CW400, 400kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates CW440, 440kW

CW440, 440kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.
Joe Powell and Associates DA050, 50kW

DA050, 50kW

The Liebert DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Joe Powell and Associates DA080, 80kW

DA080, 80kW

The Liebert DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Joe Powell and Associates DA085, 85kW

DA085, 85kW

The Liebert DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Joe Powell and Associates DA125, 125kW

DA125, 125kW

The Liebert DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Joe Powell and Associates DA150, 150kW

DA150, 150kW

The Liebert DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Joe Powell and Associates DA165, 165kW

DA165, 165kW

The Liebert DSE is the industry’s first pumped refrigeant economization system designed specifically for data centers. Ideal for companies seeking sustainable solutions, it provides up to 50% higher efficiency than traditional systems – and it uses no water. Its advanced controls automate economization to get the most free-cooling in any environment.
Joe Powell and Associates DA250 , 250kW

DA250 , 250kW

The Liebert DSE 250 provides new levels of performance for colocation and cloud hosting facilities, with rapid deployment, low cost of ownership, high energy efficiency and low peak power. The system is ideal for raised or non-raised floor data centers. Its pumped refrigerant economizer uses no water and requires no outside air into the data […]
Joe Powell and Associates DISCONTINUED – Vertiv CXE Blocks, RLSBB10

DISCONTINUED – Vertiv CXE Blocks, RLSBB10

The RLSBB10 block consists of compact IDC (insulation displacement connection) wire connectors that provide fast, easy connection of 0.4- to 0.6-mm (22- to 26-AWG) wires on both sides of the block.
Joe Powell and Associates DME020E, 20kW

DME020E, 20kW

Small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floormount or wallmount installation, and requires little or no floor space.
Joe Powell and Associates DME027E, 6.65kW

DME027E, 6.65kW

Small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floormount or wallmount installation, and requires little or no floor space.
Joe Powell and Associates DME037E, 8.9kW

DME037E, 8.9kW

Small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floormount or wallmount installation, and requires little or no floor space.
Joe Powell and Associates FQ4039
Joe Powell and Associates FQ4046
Joe Powell and Associates FQ4052
Joe Powell and Associates FQ4058
Joe Powell and Associates Liebert Challenger 3000 Perimeter Cooling System
Joe Powell and Associates Liebert Chilled Water Air Handler

Liebert Chilled Water Air Handler

The Liebert Chilled Water Air Handler provides high efficiency with elevated water loop temperatures and waterside or airside economizers.
Joe Powell and Associates Liebert Cooling System Retrofits and Upgrades

Liebert Cooling System Retrofits and Upgrades

Achieve 30% annual return on investment and improve data center efficiency and protection. From cooling unit retrofit parts to turnkey installed upgrade services, we can help you calculate ROI, configure the right solution, obtain energy rebeates, manage installations and continually optimze your cooling systems.
Joe Powell and Associates Liebert CRV In Row Cooling System, 19-40kW

Liebert CRV In Row Cooling System, 19-40kW

The Vertiv Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity.
Joe Powell and Associates Liebert CSU 3000

Liebert CSU 3000

This product is discontinued.
Joe Powell and Associates Liebert Custom Air Handling Systems

Liebert Custom Air Handling Systems

Liebert free cooling evaporative cooling systems transform data center design and meet the efficiency and availability needs of the largest, most complex data center environments. Comprehensive configuration and project management services ensure that our solutions fit each customer’s specific requirements.
Joe Powell and Associates Liebert CW Chilled Water Cooling System, 038-440kW

Liebert CW Chilled Water Cooling System, 038-440kW

The innovative Liebert CW system lets you rapidly deploy chilled water capacity, achieve higher efficiency and use less white space. It offers the industry’s widest range of capacities, featuring the industry’s most advanced controls and innovations, such as optimized coil design that maximizes capacity and efficiency even at high entering water temperatures.

Liebert Datacool

This product is discontinued.
Joe Powell and Associates Liebert DataMate Mission Critical Cooling System, 5-10.5kW

Liebert DataMate Mission Critical Cooling System, 5-10.5kW

Liebert DataMate is a small footprint cooling system for 7×24 temperature and humidity control in network closets, computer rooms and other small spaces. Its low profile permits floor-mount or wall-mount installation, and requires little or no floor space.
Joe Powell and Associates Liebert DCD Water Based Cooling Modules up to 50 kW with Liebert DCP 200 kW Pumping Unit

Liebert DCD Water Based Cooling Modules up to 50 kW with Liebert DCP 200 kW Pumping Unit

Available in both passive and active configurations, the Liebert DCD chilled water rear door heat exchanger provides cooling to high density racks. The Liebert DCP supports the Liebert DCD cooling doors by isolating the pumped water from the building chilled water system.
Joe Powell and Associates Liebert DCD Water-Cooled Active Rack Door, 35kW

Liebert DCD Water-Cooled Active Rack Door, 35kW

The Liebert DCD Active chilled water heat exchanger module installs as the rear door of an equipment rack and provides 35 kW of high density cooling. Liebert DCD modules are connected to a Liebert DCP coolant pumping unit, which acts as an isolating heat exchanger between the building chilled water source and the circulating cooling […]
Joe Powell and Associates Liebert DCD Water-Cooled Active Rack Door, 50kW

Liebert DCD Water-Cooled Active Rack Door, 50kW

The Liebert DCD Active chilled water heat exchanger module installs as the rear door of an equipment rack and provides 50 kW of high density cooling. Liebert DCD modules are connected to a Liebert DCP coolant pumping unit, which acts as an isolating heat exchanger between the building chilled water source and the circulating cooling […]
Joe Powell and Associates Liebert DCD Water-Cooled Passive Rack Door, 35 kW

Liebert DCD Water-Cooled Passive Rack Door, 35 kW

The Liebert DCD Active chilled water heat exchanger module installs as the rear door of an equipment rack and provides 35 kW of high density cooling. Liebert DCD modules are connected to a Liebert DCP coolant pumping unit, which acts as an isolating heat exchanger between the building chilled water source and the circulating cooling […]
Joe Powell and Associates Liebert DCD Water-Cooled Passive Rack Door, 50kW

Liebert DCD Water-Cooled Passive Rack Door, 50kW

The Liebert DCD is a fanless heat exchanger module that installs as the rear door of an equipment rack. This chilled water-based system provides up to 50kW of room-neutral cooling. As many as ten Liebert DCD modules are connected to a single Liebert DCP coolant pumping unit, which acts as an isolating heat exchanger between […]
Joe Powell and Associates Liebert DCP Water-Based Pumping Unit, 200kW

Liebert DCP Water-Based Pumping Unit, 200kW

The Liebert DCP houses the isolating heat exchanger between the Liebert DCD and building chilled water. It circulates the chilled water to the cooling modules at a temperature always above the actual dew point to prevent condensation.
Joe Powell and Associates Liebert Deluxe System 3 Precision Cooling Systems, 21-105kW
Joe Powell and Associates Liebert Direct Evaporative Freecooling Unit, 150-600+kW

Liebert Direct Evaporative Freecooling Unit, 150-600+kW

The Liebert Direct Evaporative Freecooling Unit delivers the lowest capital and operating costs, with a mechanical PUE of less than 1.1, streamlined installation and the industry’s lowest peak power consumption. Options are available for supplemental DX (direct expansion) or chilled water cooling sized for full or trim cooling.
Joe Powell and Associates Liebert DMC Indoor Condenser, 5-18kW

Liebert DMC Indoor Condenser, 5-18kW

The Liebert DMC is an indoor, water/glycol condenser designed for the Liebert Datamate cooling system.
Joe Powell and Associates Liebert DS Direct Expansion Cooling System

Liebert DS Direct Expansion Cooling System

As the world’s most flexible and reliable direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Joe Powell and Associates Liebert DS, DS035A, 35kW

Liebert DS, DS035A, 35kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Joe Powell and Associates Liebert DS, DS042A, 42kW

Liebert DS, DS042A, 42kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Joe Powell and Associates Liebert DS, DS053A, 53kW

Liebert DS, DS053A, 53kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Joe Powell and Associates Liebert DS, DS070A, 70kW

Liebert DS, DS070A, 70kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Joe Powell and Associates Liebert DS, DS077A, 77kW

Liebert DS, DS077A, 77kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.
Joe Powell and Associates Liebert DS, DS105A, 105kW

Liebert DS, DS105A, 105kW

As the world’s most flexible and relaible direct expansion data center cooling system, the Liebert DS improves data center efficiency and protection. The system uses the industry’s most advanced thermal controls and features a modular design, multiple compressor options and easy service access.

Liebert DSE DA080 Filter Parts

Filter parts options for the Liebert DSE DA080.
Joe Powell and Associates Liebert DSE Free-Cooling Economization System, 50-250kW

Liebert DSE Free-Cooling Economization System, 50-250kW

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Joe Powell and Associates Liebert DSE Packaged Free-Cooling Solution, 400-500kW

Liebert DSE Packaged Free-Cooling Solution, 400-500kW

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Joe Powell and Associates Liebert DSE Packaged Free-Cooling Solution, 400-500kW Draw-Thru Rooftop Configuration

Liebert DSE Packaged Free-Cooling Solution, 400-500kW Draw-Thru Rooftop Configuration

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Joe Powell and Associates Liebert DSE Packaged Free-Cooling Solution, 400-500kW Perimeter Configuration
Joe Powell and Associates Liebert DSE Packaged Free-Cooling Solution, 400-500kW Rooftop Configuration
Joe Powell and Associates Liebert DSE Packaged Free-Cooling Solution, 60kW

Liebert DSE Packaged Free-Cooling Solution, 60kW

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Joe Powell and Associates Liebert DSE Packaged Freecooling System, 60kW, Perimeter

Liebert DSE Packaged Freecooling System, 60kW, Perimeter

Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
Joe Powell and Associates Liebert DX Air Handler, 150-600+kW

Liebert DX Air Handler, 150-600+kW

The Liebert DX Air Handler delivers data center efficiency with the flexibility for modular build outs. Multiple configurations include outside air economization, evaporative condensing and evaporative cooling to reduce energy consumption.
Joe Powell and Associates Liebert EC Fan Upgrade Service

Liebert EC Fan Upgrade Service

Improve energy efficiency and overall system reliability in your data center by utilizing the newest technology for your thermal infrastructure. Electrically commutated (EC) fans offer innovative technology with exceptional value. When integrated with continuous speed control across the full operating range of thermal management units, EC fans provide a simple, cost-effective way to introduce energy-efficient […]
Joe Powell and Associates Liebert EconoPhase Pumped Refrigerant Economizer

Liebert EconoPhase Pumped Refrigerant Economizer

The Liebert Econophase pumped refrigerant economizer works with the Liebert DSE cooling unit and Liebert MC Outdoor Condenser to significantly improve data center efficiency – without bringing in outside air and without using water.
Joe Powell and Associates Liebert EFC Indirect Evaporative Freecooling System, 400kW

Liebert EFC Indirect Evaporative Freecooling System, 400kW

The Liebert EFC Indirect Evaporative Freecooling System is a highly reliable and efficient cooling system for colocation, cloud hosting and other large data centers. It combines a highly efficient heat exchanger and advanced Liebert iCOM controls to help customers save money, reduce risks and simplify thermal management. The Liebert EFC achieves mechanical PUE levels as […]
Joe Powell and Associates Liebert EFC Indirect Evaporative Freecooling System, 400kW, Perimeter

Liebert EFC Indirect Evaporative Freecooling System, 400kW, Perimeter

The Liebert EFC Indirect Evaporative Freecooling System is a highly reliable and efficient cooling system for colocation, cloud hosting and other large data centers. It combines a highly efficient heat exchanger with advanced controls to help customers save money, reduce risks and simplify thermal management. The Liebert EFC provides low peak power usage, a rapidly […]
Joe Powell and Associates Liebert EFC Indirect Evaporative Freecooling System, 400kW, Rooftop

Liebert EFC Indirect Evaporative Freecooling System, 400kW, Rooftop

The Liebert EFC Indirect Evaporative Freecooling System is a highly reliable and efficient cooling system for colocation, cloud hosting and other large data centers. It combines a highly efficient heat exchanger with advanced controls to help customers save money, reduce risks and simplify thermal management. The Liebert EFC provides low peak power usage, a rapidly […]
Joe Powell and Associates Liebert Fin/Tube Outdoor Condenser, 17.5-210kW
Joe Powell and Associates Liebert iCOM Control Upgrade Service

Liebert iCOM Control Upgrade Service

In a typical data center, cooling accounts for 38 percent of total energy consumption. Improvements to your cooling system are an opportunity for significant cost savings. Liebert iCOM control upgrade service enables more efficient variable capacity control. The intelligent control capabilities immediately enable energy and cost savings.
Joe Powell and Associates Liebert iCOM Cooling Unit Control

Liebert iCOM Cooling Unit Control

Manage and control data center cooling units to improve protection, automate cooling system routines and simplify maintenance.
Joe Powell and Associates Liebert iCOM-S Thermal Sys​tem Supervisory Control

Liebert iCOM-S Thermal Sys​tem Supervisory Control

Manage and control your entire data center cooling system for up to 50% higher efficiency, improved protection and greater productivity. Liebert iCOM-S provides a single point for managing your entire cooling infrastructure and gaining quick access to actionable data, system diagnostics and trending.
Joe Powell and Associates Liebert Indirect Evaporative Free Cooling Unit, 150-400+kW

Liebert Indirect Evaporative Free Cooling Unit, 150-400+kW

The Liebert Indirect Evaporative Free Cooling Unit improves energy efficiency with potential PUEs under 1.2 with minimal water usage. It includes supplemental DX (direct expansion) or chilled water options for trim cooling requirements.
Joe Powell and Associates Liebert MC Microchannel Outdoor Condenser, 28 – 220kW

Liebert MC Microchannel Outdoor Condenser, 28 – 220kW

The Liebert MC Microchannel Condenser is an outdoor air-cooled condenser that provides higher efficiency, while using less refrigerant. Features such as variable speed fans, advanced controls and a microchannel coil make this system uniquely innovative.
Joe Powell and Associates Liebert MCD, Indoor Condenser Unit, 7-28kW

Liebert MCD, Indoor Condenser Unit, 7-28kW

The Liebert MCD is an indoor, air-cooled condenser that works with the Liebert Mini-Mate2 and Liebert DataMate.
Joe Powell and Associates Liebert Mini-Mate, Ceiling-Mounted Precision Cooling System, 3.5-28kW

Liebert Mini-Mate, Ceiling-Mounted Precision Cooling System, 3.5-28kW

The Liebert Mini-Mate is a zero footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates Liebert Outdoor Drycooler, 7-525kW

Liebert Outdoor Drycooler, 7-525kW

Liebert outdoor drycoolers provide free-cooling and reliable heat rejection, using pumped glycol heat-transfer fluid.
Joe Powell and Associates Liebert PCW Compact Chilled Water Cooling System., 11-29kW

Liebert PCW Compact Chilled Water Cooling System., 11-29kW

Liebert PCW chilled water data center cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small space air conditioning.
Joe Powell and Associates Liebert PDX Compact DX Cooling System, 11-29kW

Liebert PDX Compact DX Cooling System, 11-29kW

The Liebert PDX direct expansion cooling system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small spaces.
Joe Powell and Associates Liebert PFH Outdoor Condenser, 3.5-28kW

Liebert PFH Outdoor Condenser, 3.5-28kW

The Liebert PFH is an outdoor air-cooled condenser designed for the Liebert Mini-Mate2 and Liebert DataMate.
Joe Powell and Associates Liebert Piggyback Indoor Condenser, 16-98.4kW

Liebert Piggyback Indoor Condenser, 16-98.4kW

Liebert Piggyback air-cooled condensers support indoor applications where outdoor heat rejection is not practical, such as high-rise buildings or areas with restricted access.
Joe Powell and Associates Liebert Piggyback Indoor Drycooler, 32-97kW

Liebert Piggyback Indoor Drycooler, 32-97kW

These indoor drycoolers provide solutions for applications where outdoor heat rejection locations are not practical, such as high-rise buildings or areas with restricted access.
Joe Powell and Associates Liebert vNSA Network Switch for Liebert iCOM Controls

Liebert vNSA Network Switch for Liebert iCOM Controls

Connects multiple cooling units equipped with Liebert iCOM unit controls, allowing them to communicate and function as a team, and also supports lead/lag operation.
Joe Powell and Associates Liebert XD Piping System for Liebert XD Units

Liebert XD Piping System for Liebert XD Units

This prefabricated, pumped-refrigerant distribution piping can be installed in anticipation of cooling system expansion to support the rapid scalability of Liebert XD cooling modules. These modules can then be quickly added, disconnected, or repositioned as required and made operational with flexible connection piping and quick-connect fittings.
Joe Powell and Associates Liebert XD Pumping and Chiller Units, 130-160kW

Liebert XD Pumping and Chiller Units, 130-160kW

The indoor Liebert XD Pumping and Chiller Units include the Liebert XDP and the Liebert XDC units. These refrigerant-based systems support Liebert XD System spot/zone data center cooling modules, including the Liebert XDO, Liebert XDV, Liebert XDH, and Liebert XD CoolFrame units. The Liebert XDP is used between the cooling units and an associated heat […]
Joe Powell and Associates Liebert XD Refrigerant-Based Cooling Modules

Liebert XD Refrigerant-Based Cooling Modules

Liebert XD refrigerant-based cooling modules deliver high-density cooling with highly flexible configurations for floor-mount, rack-mount and ceiling-mount applications.
Joe Powell and Associates Liebert XDA, Air Flow Enhancer, 1000CFM

Liebert XDA, Air Flow Enhancer, 1000CFM

The Liebert XDA rack fan unit optimizes data center cooling by increasing air flow through densely populated enclosures, past congested cabling; removing hot spots within the enclosure that can threaten the uptime of your critical systems.
Joe Powell and Associates Liebert XDC, XD Chiller and Pumping Unit, 160kW

Liebert XDC, XD Chiller and Pumping Unit, 160kW

Coolant chiller unit available in an air cooled configuration with remote condenser. In conjunction with the Liebert XD Cooling Modules, the Liebert XDC system can cool more than 30kW per rack.
Joe Powell and Associates Liebert XDH, 22-30kW​​

Liebert XDH, 22-30kW​​

In-the-row cooling module placed directly in line with the rack enclosures, and requires very little floorspace. Air from the hot aisle is drawn in through the rear of the unit, cooled, and then discharged horizontally through the front of the unit into the cold aisle.
Joe Powell and Associates Liebert XDO, XD Overhead Cooling Module, 17.2-20kW

Liebert XDO, XD Overhead Cooling Module, 17.2-20kW

Overhead cooling module that mounts directly above the cold aisle, requiring no floorspace. It draws in hot air from the hot aisle, then discharges cool air into the cold aisle where the equipment air inlets are located.
Joe Powell and Associates Liebert XDP Pumping Unit, 130-160kW

Liebert XDP Pumping Unit, 130-160kW

Liebert XDP is a system-matched pumping unit, designed to support to Liebert XDO, Liebert XDV, Liebert XDH, and Liebert XD CoolFrame spot/zone cooling units. It is the isolating interface between the building chilled water system and the pumped refrigerant circuit. In conjunction with the Liebert XD Cooling Modules, the Liebert XDP system can cool more […]
Joe Powell and Associates Liebert XDP-W, XD Water-Based Pumping Unit

Liebert XDP-W, XD Water-Based Pumping Unit

Houses the isolating heat exchanger between the Liebert DCD or Liebert XDK-W and the building chilled water. It circulates the chilled water to the cooling modules at a temperature always above the actual dew point to prevent condensation.
Joe Powell and Associates Liebert XDV, XD Racktop Cooling Module, 8.8-10kW

Liebert XDV, XD Racktop Cooling Module, 8.8-10kW

Rack cooling module that mounts vertically on or above the IT rack enclosure, requiring no floorspace. It draws hot air from inside the cabinet or from the hot aisle. It then cools the air and discharges it down to the cold aisle.
Joe Powell and Associates Liebert® XDU Coolant Distribution Unit

Liebert® XDU Coolant Distribution Unit

Designed to remove barriers to liquid cooling in an air-cooled environment, the Liebert® XDU Coolant Distribution Unit is a liquid-to-air heat exchanger for chip cooling applications that offers easy, cost-effective deployment in any data center. The unit operates without facilities water, allowing you to tap into the benefits of water-cooled servers to more efficiently support […]
Joe Powell and Associates MCR – Mini Computer Room Enclosure

MCR – Mini Computer Room Enclosure

Vertiv rack enclosure protection solutions bring together the full range of Vertiv support systems into a single package. Depending on the level of protection required, these self contained systems can include comprehensive, computer-grade support features such as cooling, power, monitoring and security — all integrated in a seamless, qualified design.
Joe Powell and Associates MMD12E, 3.55kW

MMD12E, 3.55kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates MMD18E, 4.85kW

MMD18E, 4.85kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates MMD23C, 3.80kW

MMD23C, 3.80kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates MMD24E, 5.7kW
Joe Powell and Associates MMD36E, 8.3kW

MMD36E, 8.3kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates MMD40C, 7.60kW

MMD40C, 7.60kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates MMD60E, 16.4kW

MMD60E, 16.4kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates MMD8TC, 22.5kW

MMD8TC, 22.5kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates MMD96E, 24.9kW

MMD96E, 24.9kW

The Liebert Mini-Mate2 is a zero-footprint computer room cooling system for 7×24 temperature and humidity control and air filtration. It installs above a dropped ceiling and is easy to service, requiring only front access for maintenance.
Joe Powell and Associates NetSpan BDE, UPCBD3

NetSpan BDE, UPCBD3

Vertiv BBE BD Series UPCBDs are round-cornered, square-design telephone enclosures suitable for copper or fiber distribution. These enclosures are USDA accepted. The UPCBD3, UPCBD4, and UPCBD5 include a dielectric shield, cable ties, and a shield isolation bonding/grounding bracket assembly. These accommodate buried wires, cables, terminal blocks, and load coil assemblies. Specific uses include termination of […]

NetSpan ProForm Series, Broadband Edge Enclosure

The ProFORM FTTP vault series of pedestals mounts to the top of a pre-cast vault.
Joe Powell and Associates NetXtend SCM Series

NetXtend SCM Series

​Stand-alone or separate side-loading power/equipment andbattery enclosures are designed for small cell sites at the network edge.
Joe Powell and Associates New Liebert Mini-Mate, Ceiling-Mounted Variable Capacity Cooling, 10.5, 14 & 17.5kW

New Liebert Mini-Mate, Ceiling-Mounted Variable Capacity Cooling, 10.5, 14 & 17.5kW

The New Liebert Mini-Mate 3, 4 and 5-ton (10.5, 14 & 17.5kW) variable capacity system is an efficient and reliable ceiling-mounted precision cooling system for edge computing and other small IT spaces. It saves customers money and increases IT protection through a high-efficiency variable capacity design, fast installation, lower maintenance requirements and built-in remote monitoring […]
Joe Powell and Associates PW011, 11kW

PW011, 11kW

The Liebert PCW chilled water system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small IT spaces.
Joe Powell and Associates PW017, 17kW

PW017, 17kW

The Liebert PCW chilled water system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small IT spaces.
Joe Powell and Associates PW029, 29kW

PW029, 29kW

The Liebert PCW chilled water system offers the industry’s highest efficiency, protection and capacity per footprint for server room cooling. network closets and other small IT spaces.
Joe Powell and Associates PX011, 11kW
Joe Powell and Associates PX018, 18kW
Joe Powell and Associates PX023, 23kW
Joe Powell and Associates SA1-01001NB, Vertiv Geist SwitchAir

SA1-01001NB, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01001NB is a passive 1U airflow management device for switches with air intakes on both sides. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Joe Powell and Associates SA1-01001SS, Vertiv Geist SwitchAir

SA1-01001SS, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01001SS is a passive 1U airflow management device for switches with air intake on one side. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Joe Powell and Associates SA1-01002, Vertiv Geist SwitchAir

SA1-01002, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002 is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Joe Powell and Associates SA1-01002L, Vertiv Geist SwitchAir

SA1-01002L, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002L is a passive 1U airflow management device is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool […]
Joe Powell and Associates SA1-01002S, Vertiv Geist SwitchAir

SA1-01002S, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002S is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Joe Powell and Associates SA1-01002XLNB, Vertiv Geist SwitchAir

SA1-01002XLNB, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-01002XLNB is a passive 1U airflow management device is a passive 1U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch using the on-board fans of the network devices to pull cool […]
Joe Powell and Associates SA1-02003, Vertiv Geist SwitchAir

SA1-02003, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-02003 is a passive 2U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Joe Powell and Associates SA1-02003XS, Vertiv Geist SwitchAir

SA1-02003XS, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-02003XS is a passive 2U airflow management device for switches with rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of the cabinet. […]
Joe Powell and Associates SA1-02005, Vertiv Geist SwitchAir

SA1-02005, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-02005 is a passive 2U airflow management device for rear rack mounted 2U switches with side air intake. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from the front of […]
Joe Powell and Associates SA1-03001, Vertiv Geist SwitchAir

SA1-03001, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-03001 is a passive 3U airflow management device for 3 rear rack mounted 1U switches with air intakes on both sides. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to pull cool air from […]
Joe Powell and Associates SA1-09001, Vertiv Geist SwitchAir

SA1-09001, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA1-09001 is a passive 9U airflow management device for re-directing exhaust from the side of core switches.
Joe Powell and Associates SA2-002, Vertiv Geist SwitchAir

SA2-002, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-002 is an active 2U airflow management device for 1U or 2U switches with air intake on both sides, or rear air intake (non-port side). Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans of the network devices to […]
Joe Powell and Associates SA2-003, Vertiv Geist SwitchAir

SA2-003, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-003 is an active 2U airflow management device for 1U or 2U switches with air intake on one side. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans to push cool air from the cold aisle to the intake […]
Joe Powell and Associates SA2-004, Vertiv Geist SwitchAir

SA2-004, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-004 is an active 2U airflow management device for 1U switches with air intake on front (port) side. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans to push cool air from the cold aisle to the intake of […]
Joe Powell and Associates SA2-006, Vertiv Geist SwitchAir

SA2-006, Vertiv Geist SwitchAir

The Vertiv Geist SwitchAir- SA2-006 is an active 2U airflow management device for single side air intake core switches. Channels provide a dedicated path for cold aisle air to flow to the intake of the switch, using the on-board fans to push cool air from the cold aisle to the intake of the switch. The […]
Joe Powell and Associates SmartRow DCR

SmartRow DCR

The SmartRow DCR is a self-contained, modular datacenter designed to simplify IT deployments in indoor spaces. With capacities up to 10 racks, integrating cooling, UPS, power distribution, fire suppression, and backup ventilation, the SmartRow™ enables standardization of complete micro datacenter configurations across multiple locations. The degree of factory integration maximizes installation speed while minimizing cost. […]
Joe Powell and Associates SmartRow DCX

SmartRow DCX

SmartRow DCX provides a complete data center in a row in just weeks not months. It combines four to fourteen racks with data center grade thermal management, UPSs, power management, monitoring and control technologies and cable management all in an enclosed room neutral system. With multiple ways to configure for future expansion, power and cooling […]
Joe Powell and Associates Thermal Remote Monitoring

Thermal Remote Monitoring

Leveraging your thermal management systems to support business objectives such as improving energy efficiency and cutting costs takes superior system insight and control. Continuous monitoring of your critical thermal equipment gives you this insight. Real-time data allows you to quickly make system adjustments based on your load requirements. This agility optimizes cooling and overall data […]
Joe Powell and Associates Vertiv BBD BD, UPCBD2

Vertiv BBD BD, UPCBD2

The Vertiv BDE BD Series UPCBD2 is a round-cornered, square-design telephone distribution enclosure. Included in the UPCBD2 are a dielectric shield, standoff bracket, and shield isolation bonding/grounding bracket assembly. The UPCBD2 houses terminations and splices of small pair-count buried cable. Specific applications include termination of all types of service wires and housing for all types […]
Joe Powell and Associates Vertiv BBD BD, UPCBDS

Vertiv BBD BD, UPCBDS

Vertiv BBE BD Series UPCBDS100, UPCBDS200, and UPCBDS300 are round-cornered, rectangular-design telephone equipment enclosures accepted for use by RDUP.
Joe Powell and Associates Vertiv BBE BD Series

Vertiv BBE BD Series

Vertiv BBE BD Series UPCBDs are round-cornered, square-design telephone closures suitable for copper or fiber* distribution. These closures are USDA accepted for use by the Rural Development Utilities Program (RDUP). The UPCBD3, UPCBD4, and UPCBD5 include a dielectric shield, cable ties, and a shield isolation bonding/grounding bracket assembly. Specific uses include termination of buried service […]
Joe Powell and Associates Vertiv BBE BD, BDFOKIT

Vertiv BBE BD, BDFOKIT

Vertiv BBE BD Series BDFOKIT fits any standard UPCBD4 or UPCBD5 pedestal and configures it as a fiber distribution pedestal. The BDFOKIT provides the capability to mount up to six fiber splice trays and fiber slack. The BDFOKIT minimizes the need to stock multiple pedestals as the same pedestal may be used for fiber or […]
Joe Powell and Associates Vertiv BBE BD, NSFBDSCSCX

Vertiv BBE BD, NSFBDSCSCX

Vertiv BDE BD Series (NSFBDSCSCX, NSFBDSCSC1) Fiber Distribution Kit easily mounts inside any standard UPCBD4 or UPCBD5 pedestal, converting it into a fiber distribution pedestal.
Joe Powell and Associates Vertiv BBE BD, UPCBD4

Vertiv BBE BD, UPCBD4

Vertiv BBE BD Series UPCBDs are round-cornered, square-design telephone enclosures suitable for copper or fiber distribution. These enclosures are USDA accepted. The UPCBD3, UPCBD4, and UPCBD5 include a dielectric shield, cable ties, and a shield isolation bonding/grounding bracket assembly. These accommodate buried wires, cables, terminal blocks, and load coil assemblies. Specific uses include termination of […]
Joe Powell and Associates Vertiv BBE BD, UPCBD5

Vertiv BBE BD, UPCBD5

Vertiv BBE BD Series UPCBDs are round-cornered, square-design telephone enclosures suitable for copper or fiber distribution. These enclosures are USDA accepted. The UPCBD3, UPCBD4, and UPCBD5 include a dielectric shield, cable ties, and a shield isolation bonding/grounding bracket assembly. These accommodate buried wires, cables, terminal blocks, and load coil assemblies. Specific uses include termination of […]
Joe Powell and Associates Vertiv BBE BD, UPCBD7

Vertiv BBE BD, UPCBD7

The Vertiv BBE BD Series UPCBD7 is a round-cornered, rectangular telephone equipment enclosure accepted for use by the RDUP. It serves as an aboveground enclosure used for splicing, load-coil mounting, and mounting cross-connect systems, terminal blocks, and other telco equipment. The UPCBD7 includes two PVC-coated splice support bars, ground and cable support bars, grounding connector, […]
Joe Powell and Associates Vertiv BBE BD, UPCBD8000

Vertiv BBE BD, UPCBD8000

Vertiv BBE BD Series UPCBD8000 units are round-cornered, rectangular-design enclosures that house large PIC cable splices, load coils, loop treatment devices, cross-connect, and combined connection applications.
Joe Powell and Associates Vertiv BBE CAD Series

Vertiv BBE CAD Series

Distribution enclosures for buried cable plant.
Joe Powell and Associates Vertiv BBE CAD, CAD12

Vertiv BBE CAD, CAD12

Distribution enclosures for buried cable plants
Joe Powell and Associates Vertiv BBE CAD, CAD4

Vertiv BBE CAD, CAD4

Distribution enclosures for buried cable plants
Joe Powell and Associates Vertiv BBE CAD, CAD6

Vertiv BBE CAD, CAD6

Distribution enclosures for buried cable plants
Joe Powell and Associates Vertiv BBE CAD, CAD670

Vertiv BBE CAD, CAD670

Distribution enclosures for buried cable plants
Joe Powell and Associates Vertiv BBE CAD, CAD8

Vertiv BBE CAD, CAD8

Distribution enclosures for buried cable plants
Joe Powell and Associates Vertiv BBE DSL Series

Vertiv BBE DSL Series

Vertiv BBE DSL Series enclosures are designed to accommodate up to four DSLAMs or other environmentally hardened electronic equipment, and cable splicing. These above ground galvanized steel housings deliver maximum interior capacity and easy access to install and maintain active hardened telecom equipment. Screened louvered vents maximize heat dissipation and help minimize contaminant ingression.
Joe Powell and Associates Vertiv BBE DSL, CoolPed 3.0

Vertiv BBE DSL, CoolPed 3.0

Passive vented closures to accommodate hardened electronics such as DSLAM’s

Vertiv BBE DSL, MACD12-MF

​​Cost-effective vented enclosures for hardened electronics that require heat dissipation.

Vertiv BBE DSL, MCAD12-SF

​​Cost-effective vented enclosures for hardened electronics that require heat dissipation.
Joe Powell and Associates Vertiv BBE DSX Series

Vertiv BBE DSX Series

The Vertiv BBE DSX Series of enclosures integrate a protective, ventilated compartment for weather-hardened DSLAM electronics with a weather-resistant compartment for cross-connect fields in a single enclosure.
Joe Powell and Associates Vertiv BBE DSX, Aerial

Vertiv BBE DSX, Aerial

The Vertiv BBE DSX aerial enclosures integrate a protective, ventilated compartment for weather-hardened DSLAM electronics with a weather-resistant compartment for cross-connect fields in a single enclosure.
Joe Powell and Associates Vertiv BBE DSX, Compact

Vertiv BBE DSX, Compact

The Vertiv BBE DSX compact enclosure houses one environmentally-hardened DSLAM module and includes 200 total pairs of RLS IDC terminal block cross-connect capability.
Joe Powell and Associates Vertiv BBE DSX, Pad Mount

Vertiv BBE DSX, Pad Mount

The Vertiv BBE DSX pad mount enclosures integrate a protective, ventilated compartment for weather-hardened DSLAM electronics with a weather-resistant compartment for cross-connect fields in a single enclosure.
Joe Powell and Associates Vertiv BBE FDH Series

Vertiv BBE FDH Series

The Vertiv BBE FDH Series of fiber distribution hub pedestals provides connections between fiber optic cables and passive optical splitters in the outside plant environment.
Joe Powell and Associates Vertiv BBE FDH, Enclosures

Vertiv BBE FDH, Enclosures

The Vertiv BBE FDH, Fiber Distribution Hub, pedestals provides connections between fiber optic cables and passive optical splitters in the outside plant environment.
Joe Powell and Associates Vertiv BBE FDH, Splitter Modules

Vertiv BBE FDH, Splitter Modules

Vertiv BBE FDH splitter modules are ideal for centralized splitting of fiber in Passive Optical Network (PON) FTTx architectures. These splitters are designed for use in Vertiv BBE FDH pedestals.
Joe Powell and Associates Vertiv BBE FDP Series

Vertiv BBE FDP Series

The Vertiv BBE FDP Series of optical splice enclosures permits fiber splicing, improves cable organization and houses environmentally hardened drop connections in FTTP applications.
Joe Powell and Associates Vertiv BBE OPFO Series

Vertiv BBE OPFO Series

The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of […]
Joe Powell and Associates Vertiv BBE OPFO, OPFOBD7

Vertiv BBE OPFO, OPFOBD7

The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of […]
Joe Powell and Associates Vertiv BBE OPFO, OPFOP14

Vertiv BBE OPFO, OPFOP14

The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of […]
Joe Powell and Associates Vertiv BBE OPFO, OPFOP1420

Vertiv BBE OPFO, OPFOP1420

The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of […]
Joe Powell and Associates Vertiv BBE OPFO, OPFOP1830

Vertiv BBE OPFO, OPFOP1830

The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of […]
Joe Powell and Associates Vertiv BBE OPFO, OPFOTV11

Vertiv BBE OPFO, OPFOTV11

The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of […]
Joe Powell and Associates Vertiv BBE OPFO, OPFOTV8

Vertiv BBE OPFO, OPFOTV8

The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of […]
Joe Powell and Associates Vertiv BBE PRO Series

Vertiv BBE PRO Series

Non-metallic 360° Access Pedestals for Buried Distribution Telecom applications
Joe Powell and Associates Vertiv BBE PRO, 4″ Pedestals

Vertiv BBE PRO, 4″ Pedestals

Vertiv BBE PRO Series, 4″ Pedestals ProMBDE and Pro4H are slim enclosures that house telephone buried-wire storage.
Joe Powell and Associates Vertiv BBE PRO, MI

Vertiv BBE PRO, MI

The Vertiv BBE PRO Series MI pedestal provides fiber distribution on a center mounted metal insert. These pedestals are designed for slack storage, fiber splicing and drops in buried distribution FTTH applications.
Joe Powell and Associates Vertiv BBE PRO, Pro6 to Pro1830

Vertiv BBE PRO, Pro6 to Pro1830

Vertiv BBE PRO Series enclosures are housings for buried distribution telecommunications equipment, including splice and splice/fixed-count termination applications. These non-metallic pedestals incorporate strength, rigidity, and security with a high performance thermo-plastic material designed to Telcordia GR-13 CORE and PE-91 specifications. These are ideal for applications where non-metallic construction, flood protection, or 360° access is desired.
Joe Powell and Associates Vertiv BBE PRO, URB

Vertiv BBE PRO, URB

Vertiv BBE PRO Series, URB pedestals are ideal for applications where non-metallic construction, flood protection, or 360° access is desired. These pedestals are designed for optical terminal blocks in buried distribution FTTH applications.
Joe Powell and Associates Vertiv BBE PRO, Vault

Vertiv BBE PRO, Vault

The ProFORM FTTP vault series of pedestals mounts to the top of a pre-cast vault. Three mounting bracket options are available: the Universal Rear-mounting Bracket (URB) is used for optical terminal block mounting; the fiber distribution mounting plate (FDP MI) is designed for slack storage, splicing and drops; and the plastic center mounting plate is […]
Joe Powell and Associates Vertiv BBE SE Series

Vertiv BBE SE Series

Multi-purpose copper/fiber splice or equipment pedestal enclosures for high pair-count splices, cross-connect interface, fiber/coaxial equipment, loop treatment electronics, and combined connection applications.
Joe Powell and Associates Vertiv BBE SE, Access 360

Vertiv BBE SE, Access 360

Access 360° line of metal CATV pedestals provides complete access to internally mounted distribution electronics for ease of installation and maintenance.
Joe Powell and Associates Vertiv BBE SE, BWIRE

Vertiv BBE SE, BWIRE

The BWIRE pedestal is a gray-green, round-cornered, square-design telephone-wire storage enclosure recommended for storing service wire ends until these are needed for unfinished houses.
Joe Powell and Associates Vertiv BBE SE, CCP1016

Vertiv BBE SE, CCP1016

CCP1016 Combination Connection Pedestals are above ground housings for various distribution equipment such as taps, couplers, splitters, and splice cases.
Joe Powell and Associates Vertiv BBE SE, DWIRE

Vertiv BBE SE, DWIRE

DWIRE and EWIRE pedestals are gray-green, round-cornered, square-design enclosures designed for terminating, splicing, and loading buried telephone wire.
Joe Powell and Associates Vertiv BBE SE, EWIRE

Vertiv BBE SE, EWIRE

DWIRE and EWIRE pedestals are gray-green, round-cornered, square-design enclosures designed for terminating, splicing, and loading buried telephone wire.
Joe Powell and Associates Vertiv BBE SE, MB2

Vertiv BBE SE, MB2

The MB2 pedestal is a round-cornered square-design service wire storage enclosure that stores short to moderate lengths of buried service wire for total out-of-sight plant.
Joe Powell and Associates Vertiv BBE SE, RSP

Vertiv BBE SE, RSP

RSP6 and RSP8 enclosures are round-cornered, square-design distribution pedestals for buried cable.
Joe Powell and Associates Vertiv BBE SE, SC

Vertiv BBE SE, SC

Vertiv BBE SE, SC splice enclosures are pad-mounted for above ground installations.
Joe Powell and Associates Vertiv BBE SE, SIP

Vertiv BBE SE, SIP

SIP40 and SIP40A shield isolation enclosures are designed for bonding fiber optic or copper underground splice cables to test for cable shield faults.
Joe Powell and Associates Vertiv BBE SE, UP

Vertiv BBE SE, UP

UP6400 and UP10900 enclosures are aboveground units that house open splices in PIC cable or splice cases and small lead sleeves.
Joe Powell and Associates Vertiv BBE SE, UP1652

Vertiv BBE SE, UP1652

UP1652 enclosures are aboveground housings for splices, splice cases, and T1 trunk-carrier repeater cases.
Joe Powell and Associates Vertiv BBE SE, UPC

Vertiv BBE SE, UPC

Telephone splices and equipment enclosures that serve as aboveground housings for large PIC cable splices, load coils, and other loop treatment devices.
Joe Powell and Associates Vertiv BBE SE, UPC LOC

Vertiv BBE SE, UPC LOC

UPC1000LOC and UPC1248LOC (LOC refers to Lift-Off Covers) pedestals are round-cornered, rectangular-design telephone splices or equipment enclosures with lift-off covers, housing up to 1,800 or 2,400 pairs.
Joe Powell and Associates Vertiv BBE SE, UPC1850

Vertiv BBE SE, UPC1850

The UPC1850 pedestal is a round-cornered, rectangular-design copper/fiber splice or equipment enclosure for high pair-count splices, cross-connect interface, fiber/coaxial equipment, loop treatment electronics, and combined connection application
Joe Powell and Associates Vertiv BBE TV

Vertiv BBE TV

BBE Series TV1600, TV2400 and TV2500 enclosures are above ground housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV Series

Vertiv BBE TV Series

Vertiv BBE TV Series pedestal enclosures are above ground housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV1016

Vertiv BBE TV, TV1016

TV1016 and TV1024 enclosures are aboveground housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV1024

Vertiv BBE TV, TV1024

TV1016 and TV1024 enclosures are aboveground housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV104

Vertiv BBE TV, TV104

TV104 and TV106 series classic CATV pedestals are aboveground housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV106

Vertiv BBE TV, TV106

TV104 and TV106 series classic CATV pedestals are aboveground housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV1832AF

Vertiv BBE TV, TV1832AF

TV1832AF enclosures are aboveground, low-profile housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV40

Vertiv BBE TV, TV40

TV40 and TV60LP series classic CATV pedestals are housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV60LP

Vertiv BBE TV, TV60LP

TV40 and TV60LP series classic CATV pedestals are housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv BBE TV, TV710

Vertiv BBE TV, TV710

TV710 classic CATV pedestals are aboveground housings that protect CATV distribution equipment such as taps, couplers, and splitters.
Joe Powell and Associates Vertiv BBE TV, TV80

Vertiv BBE TV, TV80

TV80, TV80SB, classic CATV pedestals are aboveground housings that protect CATV distribution equipment.
Joe Powell and Associates Vertiv CXE – Protection Panels

Vertiv CXE – Protection Panels

Rotating blocks that interconnect line circuits to outside telephone plants.
Joe Powell and Associates Vertiv CXE / BBE / XTE Accessories

Vertiv CXE / BBE / XTE Accessories

CXE / BBE / XTE Accessories for outdoor enclosures and related equipment include a wide variety of supporting tools, paint, terminal blocks, mounting equipment, labels and more.
Joe Powell and Associates Vertiv CXE AEX Series

Vertiv CXE AEX Series

The pole-mounted AEX Series is an integrated interface system consisting of a housing and drop-down terminal field the interface between feeder and distribution cables.
Joe Powell and Associates Vertiv CXE BET – BSBT

Vertiv CXE BET – BSBT

The Vertiv CXE BET Series BSBT provides a cross-connect system for apartment buildings, townhouses, condominiums, light commercial buildings, and other multidwelling units (MDUs). This terminal features a splice chamber capacity of up to 300 pairs. The complete unit consists of the housing and divider plate. The plate is also available individually for upgrading existing Emerson […]
Joe Powell and Associates Vertiv CXE BET – BUP

Vertiv CXE BET – BUP

The Vertiv CXE BET Series BUP is an outdoor-rated, self-contained building entrance protector for indoor or outdoor applications. BUP building entrance protectors provide a termination, protection, and distribution point for twenty-five, fifty, or one-hundred pairs (stackable to 300 pairs) at the subscriber premises. Potential application locations include multi-tenant dwelling complexes, hospitals, factories, shopping strip malls, […]
Joe Powell and Associates Vertiv CXE BET Series

Vertiv CXE BET Series

The Vertiv CXE BET Series indoor building entrance terminals protect the demarcation point between a Local Exchange Carriers’s outside plant cable and a customer’s building or premise cables.
Joe Powell and Associates Vertiv CXE BET, BEP

Vertiv CXE BET, BEP

The Vertiv CXE BET Series BEP combines protection and distribution with a built-in splice chamber, for a single, compact, cost-effective unit designed for indoor building entrance applications. The BEP series terminate, protect, and distribute central office cable pairs on the subscriber premises. These are ideal for use in multi-tenant dwelling and PABX installations.
Joe Powell and Associates Vertiv CXE BET, BEM

Vertiv CXE BET, BEM

Vertiv CXE MET BEM building entrance terminals protect, terminate, and distribute central office cable pairs. The terminals are built for indoor building entrance applications and designed to be stackable to accommodate future growth. These are ideal for multi-tenant office buildings, high-rise apartments, campus environments, and PABX

Vertiv CXE BET, BSBT

The Vertiv CXE BET Series BSBT provides a cross-connect system for apartment buildings, townhouses, condominiums, light commercial buildings, and other multidwelling units (MDUs). This terminal features a splice chamber capacity of up to 300 pairs. The complete unit consists of the housing and divider plate. The plate is also available individually for upgrading existing Emerson […]
Joe Powell and Associates Vertiv CXE Blocks – Protection Panels

Vertiv CXE Blocks – Protection Panels

NetReach CO Series central office connectors that protect personnel and equipment from abnormal voltages and currents on incoming cable pairs and terminal blocks to connect to equipment.
Joe Powell and Associates Vertiv CXE Blocks – R66

Vertiv CXE Blocks – R66

Vertiv CXE R66 Series blocks are used in telephone equipment rooms or sattelite closets to install key telephone systems, PBX systems, data cables, and other low voltage terminal equipment
Joe Powell and Associates Vertiv CXE Blocks – RLS

Vertiv CXE Blocks – RLS

RLS Series IDC terminal blocks
Joe Powell and Associates Vertiv CXE Blocks, R66B350

Vertiv CXE Blocks, R66B350

R66 Series blocks are units used in telephone equipment rooms or sattelite closets to install key telephone systems, PBX systems, data cables, and other low voltage terminal equipment
Joe Powell and Associates Vertiv CXE Blocks, R66M

Vertiv CXE Blocks, R66M

R66M blocks are units used in telephone equipment rooms or sattelite closets to install key telephone systems, PBX systems, data cables, and other low voltage terminal equipment
Joe Powell and Associates Vertiv CXE Blocks, R66MOD

Vertiv CXE Blocks, R66MOD

R66 Series blocks are units used in telephone equipment rooms or sattelite closets to install key telephone systems, PBX systems, data cables, and other low voltage terminal equipment
Joe Powell and Associates Vertiv CXE Blocks, R66P25

Vertiv CXE Blocks, R66P25

R66 Series blocks are units used in telephone equipment rooms or sattelite closets to install key telephone systems, PBX systems, data cables, and other low voltage terminal equipment
Joe Powell and Associates Vertiv CXE Blocks, RLS

Vertiv CXE Blocks, RLS

Aluminum or plastic outdoor distribution point units with brass terminals are used for open wire circuits and long drop wire runs.
Joe Powell and Associates Vertiv CXE EXX Series

Vertiv CXE EXX Series

Vertiv CXE EXX Series expansion cabinets allows an existing cross-connect cabinet to increase from its original size without disrupting service.
Joe Powell and Associates Vertiv CXE LCX Series

Vertiv CXE LCX Series

The Vertiv CXE LCX Series offers an economical way to satisfy low pair count cross connect needs up to 900 pair using RLS50 blocks. These affordable, above-ground metal pedestals offer many of the same features as larger, more expensive cross-connect enclosures and can be pad-mounted or direct buried.
Joe Powell and Associates Vertiv CXE LCX, Direct Buried

Vertiv CXE LCX, Direct Buried

The Vertiv CXE LCX Series offers an economical way to satisfy low pair count cross connect needs up to 300 pair using RLS50 blocks. These affordable, direct buried metal pedestals offer many of the same features as larger, more expensive cross-connect enclosures.
Joe Powell and Associates Vertiv CXE LCX, Swing-Out Panel

Vertiv CXE LCX, Swing-Out Panel

The Vertiv CXE LCX Series offers an economical way to satisfy low pair count cross connect needs up to 900 pair using RLS50 blocks. These affordable, above-ground metal pedestals offer many of the same features as larger, more expensive cross-connect enclosures and can be pad-mounted or direct buried.
Joe Powell and Associates Vertiv CXE UCX Series

Vertiv CXE UCX Series

The UCX Series is an enhanced DRLS drop-down style center-feed cross-connect interface system equipped with 50-pair RLS terminal blocks, in pair counts up to 8100 pairs.
Joe Powell and Associates Vertiv CXE UNX

Vertiv CXE UNX

The Vertiv CXE UNX Swing-Out Series is a cross-connect interface system featuring a center-feed horizontal jumper run for efficient installation of jumpers. The cabinets are equipped with RLS50 self-strip terminal blocks, and are available in pair counts of up to 5400 pairs. Vertive CXE XC cabinets are intended for use as a serving area interface […]
Joe Powell and Associates Vertiv CXE UPX Series

Vertiv CXE UPX Series

The UPX Series are round-cornered, rectangular-design telephone cross-connect enclosures.
Joe Powell and Associates Vertiv Geist SwitchAir

Vertiv Geist SwitchAir

Network switches, load balancers and routers typically sit at the top and back portion of the rack, away from the cold aisle airflow at the front of the cabinet. This placement makes it difficult for cold air to flow from the front of the rack to the air intakes of the network switch equipment, increasing […]
Joe Powell and Associates Vertiv VRC Rack Cooling System, 3500 Watts

Vertiv VRC Rack Cooling System, 3500 Watts

The Vertiv™ VRC™ rack cooling system is designed specifically for fast, easy installation in small server rooms, network closets, and edge computing spaces. This self-contained IT rack unit saves valuable floor space and provides up to 3,500 watts of cooling to critical equipment. Additionally, its variable speed components ensure high efficiency and scalable capacity.
Joe Powell and Associates Vertiv XTE 201 Series

Vertiv XTE 201 Series

Compact power, equipment and battery enclosures designed for small cell sites at the network edge.
Joe Powell and Associates Vertiv XTE 201, 120VAC-NiCd

Vertiv XTE 201, 120VAC-NiCd

​Separate side-loading power/equipment and NiCd battery enclosures are designed for small cell sites at the network edge.
Joe Powell and Associates Vertiv XTE 201, 208/240VAC-NiCd

Vertiv XTE 201, 208/240VAC-NiCd

​Separate side-loading power/equipment and NiCd battery enclosures are designed for small cell sites at the network edge.
Joe Powell and Associates Vertiv XTE 201, 208/240VAC-VRLA

Vertiv XTE 201, 208/240VAC-VRLA

​Separate side-loading power/equipment and VRLA battery enclosures are designed for small cell sites at the network edge.
Joe Powell and Associates Vertiv XTE 401 Series

Vertiv XTE 401 Series

Designed to discretely house DC power equipment, electronics and batteries in a single robust enclosure. The Vertiv XTE 401 Series is a family of three small single-sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Joe Powell and Associates Vertiv XTE 401, 2410

Vertiv XTE 401, 2410

The Vertiv XTE 401 Series is a family of three small single-sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Joe Powell and Associates Vertiv XTE 401, 2416

Vertiv XTE 401, 2416

The Vertiv XTE 401 Series is a family of three small single sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Joe Powell and Associates Vertiv XTE 401, 3816

Vertiv XTE 401, 3816

TheVertiv XTE 401 Series is a family of three small single sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Joe Powell and Associates Vertiv XTE 601 Series

Vertiv XTE 601 Series

Vertiv XTE 601 Series of scalable outdoor enclosure solutions designed to ensure environmental stability for sophisticated electronic equipment and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Joe Powell and Associates Vertiv XTE 601, 12 RU

Vertiv XTE 601, 12 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Joe Powell and Associates Vertiv XTE 601, 17 RU

Vertiv XTE 601, 17 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Joe Powell and Associates Vertiv XTE 601, 22 RU

Vertiv XTE 601, 22 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Joe Powell and Associates Vertiv XTE 601, 27 RU

Vertiv XTE 601, 27 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Joe Powell and Associates Vertiv XTE 601, 32 RU

Vertiv XTE 601, 32 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Joe Powell and Associates Vertiv XTE 601, 8 RU

Vertiv XTE 601, 8 RU

Vertiv XTE 601 Series of scalable outdoor enclosure solutions is designed to ensure environmental stability for sophisticated electronic equipment, and provide years of trouble-free service wherever the outdoor enclosure is deployed.
Joe Powell and Associates Vertiv XTE 601B Series

Vertiv XTE 601B Series

The Vertiv XTE 601B Series enclosures are available in a variety of heights and designed to accept NiCd and/or VRLA batteries, and can be cooled actively or by free air.
Joe Powell and Associates Vertiv XTE 601B, 60″-72″ Enclosures

Vertiv XTE 601B, 60″-72″ Enclosures

The Vertiv XTE 601B enclosures are available in both 60″ and 72″ heights, and are designed to accept VRLA batteries.
Joe Powell and Associates Vertiv XTE 601E Series

Vertiv XTE 601E Series

Designed to support C-RAN technology today while providing the flexibility to adapt to the 5G infrastructure needs of tomorrow. Streamline infrastructure at your site by consolidating electronics, power and batteries in a single enclosure.

Vertiv XTE 601E, 84″ Enclosure

This thermally controlled enclosure combines DC power, network electronics and battery backup in a single compartment to meet your macro cell site or C-RAN deployment needs. Electronics and batteries are kept at proper operating temperature by either a door mounted heat exchanger (HX) or an air conditioner, with two Thermal Electric Coolers (TECs) managing battery […]
Joe Powell and Associates Vertiv XTE 601P, 60″ Enclosure

Vertiv XTE 601P, 60″ Enclosure

The Vertiv XTE 601P, 60″ enclosure is designed to house DC power equipment, electronics and VRLA batteries in a single cabinet.

Vertiv XTE 601P, 72″ Enclosure

The Vertiv XTE 601P, 72″ enclosure is designed to house DC power equipment, electronics and VRLA batteries in a single cabinet.
Joe Powell and Associates Vertiv XTE 601P, 72″ Enclosure

Vertiv XTE 601P, 72″ Enclosure

The Vertiv XTE 601P, 72″ enclosure is designed to house DC power equipment, electronics and VRLA batteries in a single cabinet.
Joe Powell and Associates Vertiv XTE 802 Series

Vertiv XTE 802 Series

The Vertiv XTE 802 Series Network Edge Enclosure, constructed entirely of lightweight steel, ensures vital electronic equipment is protected from vandalism and environmental damage.
Joe Powell and Associates Vertiv XTE ATS, Outdoor

Vertiv XTE ATS, Outdoor

The Vertiv XTE ATS outdoor Automatic Transfer Switch compliments Vertiv XTE integrated outdoor enclosures ideal for shelters and huts in the wireless industry, while the outdoor solution is designed to accompany an existing manual transfer switch or stand alone in any copper, fiber or wireless application.
Joe Powell and Associates Vertiv XTE EBRE Series

Vertiv XTE EBRE Series

The Vertiv XTE EBRE Series enclosure is an extended battery reserve enclosure that provides a stable environment for battery backup of your wireless site in case of power grid failure.
Joe Powell and Associates Vertiv XTE Platform Series

Vertiv XTE Platform Series

Designed to be installed in eight hours or less, the Vertiv™ XTE Platform Series is ideal for rapidly deploying cell sites. Prefabrication saves money, simplifies installation, and minimizes site disturbance.
Joe Powell and Associates Vertiv XTE PTS Series

Vertiv XTE PTS Series

Vertiv XTE PTS Series provides main service disconnect, AC surge protection, AC distribution and generator connection in a single environmentally protected enclosure geared toward remote telecom installations.

Vertiv XTE PTS, Power Protection Cabinets

The Vertiv XTE PTS, Power Protection Cabinets with NTI Technology from Vertiv offers full-service power transfer pedestals for use with outdoor electronic equipment enclosures, especially for the wireless market (i.e. base stations, remote terminals).
Joe Powell and Associates Vertiv XTE PTS, Power Transfer Switches

Vertiv XTE PTS, Power Transfer Switches

The Vertiv XTE PTS, Power Transfer Switches provides main service disconnect, AC surge protection, AC distribution and generator connection in a single environmentally protected enclosure geared toward remote telecom installations.
Joe Powell and Associates Vertiv XTE Sole Enclosure

Vertiv XTE Sole Enclosure

The Vertiv XTE Sole Enclosure offers thermal management, battery backup and room for wireless carrier equipment to meet your small cell application needs.
Joe Powell and Associates Vertiv XTE Stackable Series
Joe Powell and Associates VRC100

VRC100

The Vertiv™ VRC™ rack cooling system is designed specifically for fast, easy installation in small server rooms, network closets, and edge computing spaces. This self-contained IT rack unit saves valuable floor space and provides up to 3,500 watts of cooling to critical equipment. Additionally, its variable speed components ensure high efficiency and scalable capacity.
Joe Powell and Associates VRC101

VRC101

The Vertiv™ VRC™ rack cooling system is designed specifically for fast, easy installation in small server rooms, network closets, and edge computing spaces. This self-contained IT rack unit saves valuable floor space and provides up to 3,500 watts of cooling to critical equipment. Additionally, its variable speed components ensure high efficiency and scalable capacity.